PROJECTS & SECTORS
PROJECTS & SECTORS
![Elementor Homepage [DRAFT] - EKSPAN](https://www.ekspan.com/wp-content/uploads/2025/11/Triangle-Green.svg)
EKSPAN successfully collaborated with Story Contracting to deliver a major milestone with the installation of a new 140 tonne asymmetrical steel arch bridge at Three…
![Elementor Homepage [DRAFT] - EKSPAN](https://www.ekspan.com/wp-content/uploads/2025/11/Triangle-white.svg)
EKSPAN collaborated with Harrisons engineering, to successfully replace a 200-year-old Tram Bridge with a new £6.6m infrastructure across the River Ribble in Preston….
EKSPAN was appointed to deliver essential structural remediation and bearing works at Westquay Shopping Centre, one of Southampton’s most prominent retail destinations….
EKSPAN partnered with SKANSKA to prepare essential bearing replacement works on Clifton Bridge, a vital structure located in Penrith….
EKSPAN worked collaboratively with Pat Munro and MHB Consultants to deliver the bearing replacement works on Bishopmill Bridge in Elgin, a key structure with 39…
As part of the multi-billion-pound TRU programme, EKSPAN worked alongside Skanska, Arup and the TRU Alliance to deliver complex structural support works on Span 1…
As part of the multi-billion-pound TRU programme, EKSPAN worked alongside Skanska, Arup and the TRU Alliance to deliver complex structural support works on Span 1…
EKSPAN designed and installed permanent and temporary bearing solutions for Glasgow’s Govan Partick Bridge, ensuring safe construction and long-term performance of one of Europe’s longest…
EKSPAN successfully replaced eight critical bridge bearings on Belfast’s M3 Lagan Bridge, ensuring long-term safety for 90,000 daily vehicles….
EKSPAN deliver phased expansion joint upgrades on Avon Bridge, using T-Mat systems to boost vehicle comfort, reduce maintenance & enhance performance….
As part of the Leeds Station Improvement Scheme, EKSPAN supported Balfour Beatty with the installation of elastomeric bearings above the Mill Goit. Discover how our…
EKSPAN installed a T-Mat 130 Expansion Joint as part of the multi-billion pound Battersea Power Station project in London to rejuvenate the surrounding area….
EKSPAN provided complete end-to-end services to repair the Glencarse Bridge-strike on the A90 road between Perth and Dundee….
EKSPAN supplied client BAM Nuttall to supply the temporary restraints, hydraulic cylinder and bearings for the Newhaven Port Access Road in East Sussex….
EKSPAN provided end-to-end services, to support the Gull Wing Bridge project in Lowestoft, for our clients Farrans Construction….
As part of the Transpennine Route Upgrade, EKSPAN supported BAM TRU West with the installation of elastomeric and mechanical bearings at Calder Road. Discover how…
EKSPAN were selected as Principal Contractor by The City of London Corporation to fabricate and install two new glass floors on Tower Bridge’s West and…
EKSPAN were selected as Principal Contractor by The City of London Corporation to fabricate and install two new glass floors on Tower Bridge’s West and…
EKSPAN was contracted by Skanska BAM Nuttall JV to install 2 no. T-Mat 80 expansion joints with concurrent installation of mechanical and elastomeric bearings on…
EKSPAN were successful in securing the design and manufacture of 60 new stainless steel mechanical bearings. EKSPAN were also responsible for the temporary works design…
EKSPAN were instructed to remove and replace the damaged carbon wrap pipe with a new pipe section, including installation of an additional moving joint. Pre-works…
The hydro-electric power station is located near the river Conwy in North Wales. The high head pipeline, originally constructed around the 1930’s, delivers water to…
EKSPAN’s involvement in the Falkirk Wheel was the design, manufacture and installation of the aqueduct expansion joints….
EKSPAN were instructed to replace bearing stools assemblies on the low head high pressure pipeline for plinths 2, 4 and 6….
EKSPAN’s Solution The roof construction of the stadium created a number of technical issues with respect to managing dynamic loads. Additional rotations and movements had…
EKSPAN were instructed by Eversendai Engineering to design, manufacture and supply 522 no mechanical and elastomeric bearings for installation on 58 bridges, on two levels….
EKSPAN manufactured 208 no finger joints, which replicated the existing finger joints, on a like for like basis to suit interchangeability during installation. Badly eroded…
EKSPAN were instructed by Eversendai Engineering to design, manufacture and supply 522 no mechanical and elastomeric bearings for installation on 58 bridges, on two levels….
